|当前位置 -> 热风炉首页－ 热风炉知识－ 热风炉安装知识及产排污问题 发布时间：(2018/11/29)关键词：热风炉|
For the current market, gas-fired hot stove is a very good hot stove energy-saving and environmental protection, and high efficiency, but to make the hot stove better use, we need to pay attention to the installation of hot stoves. Because, no matter how good the gas hot-blast stove is, if it is not installed in place and installed correctly, it is impossible to use it perfectly when using it. Installation of hot stove:
Before installing the hot blast stove, we need to have a certain plan layout, determine the location of the hot blast stove room, the size of the hot blast stove room, and the height of the hot blast stove room, etc. Because the hot blast stove is used to provide heat energy, so the temperature of the hot blast stove room is very good, so the installed hot blast stove should have sufficient passageway to ensure the passage through. The wind and the passing of pedestrians. And it's better to choose a place where pedestrians pass less.
In the next step of installation, we should also pay attention to the problem of ventilation, because the use of gas hot stoves will produce a large number of fumes, even if each gas hot stove has a special smoke exhaust facilities, but still pay attention to the problem of ventilation during installation. Note that ventilation has two advantages: first, it is conducive to smoke emissions; second, it can keep the temperature in the hot stove room, so that the temperature is too high, making people feel uncomfortable in it.
Discharge of hot stove:
When the gas hot blast stove is used for a period of time, we need to regularly carry out the work of sewage discharge. During the period of sewage discharge, what steps do we need to pay attention to?
1. Open the regular sewage discharge main valve;
2. Open the second valve slowly after opening the first valve.
3. After the sewage is discharged, the secondary valve should be shut down first, and then the primary valve should be shut down. The sewage should be discharged slowly to prevent water impact. If the pipeline has serious vibration, the sewage should be stopped and the sewage should be discharged after the fault is eliminated.
4. In the process of sewage discharge, if an accident occurs in the hot blast stove, the sewage discharge shall be stopped immediately, except for the excessive water level of the drum and the co-evaporation of steam and water.
5. It is forbidden to discharge pollutants simultaneously from two hot stoves.
The raw water of softening water equipment of gas hot blast stove enters the control valve from the inlet, passes through the valve body from the upper part of the valve core, and enters the tank from the top. Then, it passes down through the resin layer to become softening water, returns to the central pipe through the lower water distributor, goes up to the valve body, and discharges from the outlet of the softening water equipment through the valve core. The raw water of the softening water equipment enters the control valve from the intake port, enters the nozzle through the valve core, and flows rapidly to the nozzle outlet to generate negative pressure, thus brine in the salt tank is sucked into the valve body from the salt suction port and enters the top of the tank body. In this way, the whole process of gas hot blast stove drainage is over. We should also pay attention to the problems during the drainage period, solve them in time, and make good use of the whole.
|相关阅读：客户购买工业热风炉厂要这样选！性价比 | 厂家总结间接式燃气热风炉知识【新手必读】 | 你知道热风炉的热量单位是什么吗？|
版权所有：无锡市ag88环亚手机干燥设备有限公司主营：热风炉 电话：0510-83955910 传真：0510-83051522 技术支持：易商科技